[SOLVED] No sound coming out of Focusrite Scarlett 6i6 in UbuntuStudio 16.04

Hi,
I'm not being able to get any sound out off my Focusrite Scarlett 6i6 USB soundcard, although it seems to be recognized by system and shows up in volume control. I performed a fresh install of UbuntuStudio 16.04, having my soundcard powered-on and connected while installing. These are some command outputs that show that the soundcard is properly recognized by system:

$ lsusb
Bus 002 Device 003: ID 046d:c050 Logitech, Inc. RX 250 Optical Mouse
Bus 002 Device 004: ID 1235:8012 Focusrite-Novation Scarlett 6i6
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 05ca:18c0 Ricoh Co., Ltd
Bus 001 Device 003: ID 08ff:168f AuthenTec, Inc. AES1660 Fingerprint Sensor
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

$ usb-devices
T: Bus=02 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2
P: Vendor=1235 ProdID=8012 Rev=02.60
S: Manufacturer=Focusrite
S: Product=Scarlett 6i6 USB
S: SerialNumber=7855117D
C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=01(audio) Sub=01 Prot=20 Driver=snd-usb-audio
I: If#= 1 Alt= 1 #EPs= 2 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio
I: If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio
I: If#= 3 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=snd-usb-audio
I: If#= 4 Alt= 0 #EPs= 2 Cls=01(audio) Sub=03 Prot=00 Driver=snd-usb-audio
I: If#= 5 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)

$ cat /proc/asound/cards
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xc9400000 irq 37
1 [USB ]: USB-Audio - Scarlett 6i6 USB
Focusrite Scarlett 6i6 USB at usb-0000:00:1d.0-1.2, high speed

I've already selected my USB-sound card in volume control (pavucontrol), it shows up and apparently works (the soundbar moves when starting a sound streaming), but I'm not getting any sound out of it. I've also tried configuring QjackCtl, but I get same behaviour when selecting jack in volume control (soundbar moves, but no sound).

Any hints?
Thanks!

Let's block ads! (Why?)

[SOLVED] No sound coming out of Focusrite Scarlett 6i6 in UbuntuStudio 16.04