Once again here's another problem my linux decided to break down.
My wifi is working but when it comes to being wired in...not so much.
I tried a lot of solutions but none worked...
It was working this morning and now it is not.
Heres a list of stuff. Why am I not connecting to my wired connection?
ifconfig
Code:
eth0 Link encap:Ethernet HWaddr 80:fa:5b:2b:96:84
inet6 addr: fe80::82fa:5bff:fe2b:9684/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:73 errors:0 dropped:0 overruns:0 frame:0
TX packets:124 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6555 (6.5 KB) TX bytes:25744 (25.7 KB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:833 errors:0 dropped:0 overruns:0 frame:0
TX packets:833 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:79645 (79.6 KB) TX bytes:79645 (79.6 KB)
wlan0 Link encap:Ethernet HWaddr a4:34:d9:64:d9:a8
inet addr:192.168.2.36 Bcast:192.168.3.255 Mask:255.255.252.0
inet6 addr: fe80::a634:d9ff:fe64:d9a8/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1816 errors:0 dropped:0 overruns:0 frame:0
TX packets:1529 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1526261 (1.5 MB) TX bytes:293164 (293.1 KB)
Code:
[main]
plugins=ifupdown,keyfile,ofono
dns=dnsmasq
[ifupdown]
managed=true
Code:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
nm-tool
Code:
- Device: wlan0 [staybridge] --------------------------------------------------
Type: 802.11 WiFi
Driver: iwlwifi
State: connected
Default: yes
HW Address: A4:34:D9:64:D9:A8
Capabilities:
Speed: 1 Mb/s
Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes
Wireless Access Points (* = current AP)
PC2: Infra, C8:D7:19:48:70:C0, Freq 2422 MHz, Rate 54 Mb/s, Strength 40 WPA2
staybridge: Infra, 00:02:6F:CB:F5:60, Freq 2412 MHz, Rate 54 Mb/s, Strength 72
staybridge: Infra, 00:02:6F:BF:2C:70, Freq 2417 MHz, Rate 54 Mb/s, Strength 60
staybridge: Infra, 00:02:6F:BF:2C:84, Freq 2442 MHz, Rate 54 Mb/s, Strength 54
CableWiFi: Infra, 50:1C:BF:49:7B:2C, Freq 5805 MHz, Rate 54 Mb/s, Strength 35
staybridge: Infra, 00:02:6F:B7:31:F8, Freq 2427 MHz, Rate 54 Mb/s, Strength 40
staybridge: Infra, 00:02:6F:B7:32:00, Freq 2447 MHz, Rate 54 Mb/s, Strength 35
EnGeniusBF2C78: Infra, 00:02:6F:BF:2C:78, Freq 2462 MHz, Rate 54 Mb/s, Strength 56
PC: Infra, C4:3D:C7:8E:82:88, Freq 2437 MHz, Rate 54 Mb/s, Strength 47 WPA2
PC2: Infra, C8:D7:19:48:70:C1, Freq 5180 MHz, Rate 54 Mb/s, Strength 35 WPA2
staybridge: Infra, 00:02:6F:E9:DB:C0, Freq 2462 MHz, Rate 54 Mb/s, Strength 62
staybridge: Infra, 00:02:6F:BF:2C:60, Freq 2432 MHz, Rate 54 Mb/s, Strength 49
xfinitywifi: Infra, 50:1C:BF:49:7B:2E, Freq 5805 MHz, Rate 54 Mb/s, Strength 35
staybridge: Infra, 00:02:6F:B7:32:04, Freq 2447 MHz, Rate 54 Mb/s, Strength 35
CableWiFi: Infra, 18:9C:5D:8E:9C:83, Freq 2462 MHz, Rate 54 Mb/s, Strength 35
*staybridge: Infra, 00:02:6F:E9:DB:B0, Freq 2462 MHz, Rate 54 Mb/s, Strength 69
VAIO-UD56UU: Infra, D0:AE:EC:A9:A4:8A, Freq 2457 MHz, Rate 54 Mb/s, Strength 37 WPA WPA2
optimumwifi: Infra, 50:1C:BF:49:7B:20, Freq 2412 MHz, Rate 54 Mb/s, Strength 37
optimumwifi: Infra, F0:29:29:C3:4A:60, Freq 2462 MHz, Rate 54 Mb/s, Strength 35
TWCWiFi: Infra, 50:1C:BF:49:7B:22, Freq 2412 MHz, Rate 54 Mb/s, Strength 39
xfinitywifi: Infra, D0:C7:89:3B:B8:A1, Freq 2437 MHz, Rate 54 Mb/s, Strength 35
IPv4 Settings:
Address: 192.168.2.36
Prefix: 22 (255.255.252.0)
Gateway: 192.168.3.251
DNS: 8.8.8.8
DNS: 8.8.4.4
- Device: eth0 -----------------------------------------------------------------
Type: Wired
Driver: r8169
State: disconnected
Default: no
HW Address: 80:FA:5B:2B:96:84
Capabilities:
Carrier Detect: yes
Speed: 1000 Mb/s
Wired Properties
Carrier: on
Code:
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0.1
bus info: pci@0000:01:00.1
logical name: eth0
version: 12
serial: 80:fa:5b:2b:96:84
size: 1Gbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8411-2_0.0.1 07/08/13 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s
resources: irq:126 ioport:e000(size=256) memory:df214000-df214fff memory:df210000-df213fff
*-network
description: Wireless interface
product: Wireless 8260
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:02:00.0
logical name: wlan0
version: 3a
serial: a4:34:d9:64:d9:a8
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=4.2.0-42-generic firmware=25.30.13.0 ip=192.168.2.36 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn
resources: irq:129 memory:df100000-df101fff
I tried adding these lines of codes inside /etc/network/interfaces and no changes
Code:
auto eth0
iface eth0 inet dhcp
Problem connecting with wired connection
