Excuse me if this is not the right place...
But in unity, cinnamon and mate, my computer restarts when I resume from suspend (if suspend is working at all).
Googled and tried everything to no avail.
Anyone have any suggestions?
This does not happen with KDE.
Thanks
Dafydd
All times are GMT +1. The time now is 11:40 AM.
All times are GMT +1. The time now is 10:56 AM.
my problem is that my wireless network card stop working suddenly ,,, when i am connecting normaly it just stop and shut down i disconnect automatically from wifi and i when i try to connect again i doin't find it i don't find any wifi network its just like someone shut down all the routers ,, and after a while i recconnect automatically and all the wifi network shown again ,, it keeps doing this at least 5 times every hour what is the problem plz can any one help me what shall i do ?? :/
Hi,
I am trying to get a Windows 7 Ultimate ISO installed on to an USB and have been using Wine and WinToUSB in several operating systems (Lubuntu 12.04, Bodhi 12.02, Puppy Precise and, most recently, Lubuntu 16.04) but, in each case, with the following difficulties.
The downloaded WinToUSB.exe is contained within the Program Files folder of Wine but after installing its contents to a WinToUSB folder it also produces an Error Message: Specified object not found. (0x00010013003F0000). (See Below).
When I click another WinToUSB.exe file within the WinToUSB installation folder the usual GUI appears. However, although I can tell the program where about the ISO can be found and also select 'Windows 7 Ultimate' as the operating system, upon clicking 'Next' (in order to choose the 'destination' location) I get another Error message: Specified object not found. (0x00000013003F0000) (See Below) and that's the end of it, it won't do anything else.
Does anyone know what these Error messages mean and what I can do from here to get this ISO installed on an USB successfully? Thanks,
dave
I just built a new computer using the Asus H110T and an Intel 7260 Network card, and no wifi networks appear in the Network Manager. (yes there are wifi networks in range) The ethernet ports do work though. I only have Ubuntu installed on it, and I've fully upgraded everything. Here is some diagnostic code I thought you might like to see based on other posts I've looked at while trying to figure this out. Is there any other information I should provide you?
Code:
~$ sudo lshw -C network
*-network
description: Wireless interface
product: Wireless 7260
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:02:00.0
logical name: wlp2s0
version: bb
serial: cc:3d:82:a7:58:69
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=4.4.0-31-generic firmware=16.242414.0 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn
resources: irq:126 memory:f7100000-f7101fff
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:03:00.0
logical name: enp3s0
version: 15
serial: 34:97:f6:87:f3:e5
size: 10Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168h-2_0.0.2 02/26/15 latency=0 link=no multicast=yes port=MII speed=10Mbit/s
resources: irq:122 ioport:e000(size=256) memory:f7004000-f7004fff memory:f7000000-f7003fff
*-network
description: Ethernet interface
product: Ethernet Connection (2) I219-V
vendor: Intel Corporation
physical id: 1f.6
bus info: pci@0000:00:1f.6
logical name: enp0s31f6
version: 31
serial: 34:97:f6:87:f3:e4
size: 100Mbit/s
capacity: 1Gbit/s
width: 32 bits
clock: 33MHz
capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k duplex=full firmware=0.8-4 ip=192.168.1.109 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
resources: irq:123 memory:f7200000-f721ffff
Code:
~$ sudo iwconfig
lo no wireless extensions.
enp0s31f6 no wireless extensions.
enp3s0 no wireless extensions.
wlp2s0 IEEE 802.11abgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
As I love quite some of nemo's feature, I tried to install it according to these instuctions:
http://ift.tt/2ajBRQ2
at my ubuntu 16.04 gnome box. Nemo will not launch from "activities", trying it from the terminal, it will throw:
Code:
nemo: error while loading shared libraries: libgnome-desktop-3.so.10: cannot open shared object file: No such file or directory
Code:
/usr/lib/x86_64-linux-gnu/libgnome-desktop-3.so -> libgnome-desktop-3.so.12.0.0
/usr/lib/x86_64-linux-gnu/libgnome-desktop-3.so.12 -> libgnome-desktop-3.so.12.0.0
/usr/lib/x86_64-linux-gnu/libgnome-desktop-3.so.12.0.0